Tips-A2Z home page


Sub-categories

(None)

Category  |   Discussion (0)Saw

Main > Building & fixing > Building > Building tools > Saw
Portable circular saw: For a straight cut, cut fast. This also reduces any small splinters at the bottom, finishing end of the cut. The blade should extend a maximum of 6mm below the timber, for maximum blade efficiency, as well as safety.   kellyjones00 (593)

– –– ——— –– –
Main > Building & fixing > Building > Building tools > Saw
Cutting planks: To avoid the saw binding with the timber, cut on the unclamped side of two clamped sections. If the piece cut off is very long, weight the far side so the falling piece lifts up and away when cut. If it is weighted to fall down, it will push against the saw blade, which may kick back against you.   kellyjones00 (593)
 
 


Click to enlarge

– –– ——— –– –

 

 

To post a new tip, sign up for a free account.
(Unfortunately this is a necessary spam prevention measure)
Who is online
In total there are 43 users online :: 0 registered and 43 guests (based on users active over the past 5 minutes)