Tips-A2Z home page


Sub-categories

(None)

All  |   Discussion (0)Saw blades

By cutting greenwood, resin or "pitch" will quickly build up on the teeth of a saw. The disc will heat up faster, not cut well, and be prone to warping. Take the blade off and clean the resin off while still soft, before much use heats and hardens it. Soak in mineral turps for several hours, then use a plastic implement like a plastic paint scraper or nylon scourer to rub off the gunge, and do not use metal scrapers or files.   kellyjones00 (593)

– –– ——— –– –


 


 

To post a new tip, sign up for a free account.
(Unfortunately this is a necessary spam prevention measure)

Who is online
In total there are 3 users online :: 0 registered and 3 guests (based on users active over the past 5 minutes)