Tips-A2Z home page


Sub-categories

(None)

All  |   Discussion (0)Woodfire heating

Fix a smoky woodfire:
  • Only use dry wood, preferably hardwood.

  • The flue outlet from the woodfire should become quickly vertical with no more than one 45° bend. If the flue is within three metres of the building ridge, then the flue needs to end above the ridge.

  • Increase air pressure at the woodfire inlet, not at the exhaust side. E.g. open a window or create holes in the wall opposite the air inlet.

  • Eliminate any holes in the flue or exhaust, apart from the main outlet and the top of the flue.

  • Preheat the flue.

  • Raise the fire-bed onto a metal grate and direct air into the space underneath the fire.

  • Ensure the opening for air flowing into the fire is larger than the flue outlet for exhausted air. Experiment with the ratio.

   kellyjones00 (593)

– –– ——— –– –


 


 

To post a new tip, sign up for a free account.
(Unfortunately this is a necessary spam prevention measure)

Who is online
In total there are 6 users online :: 0 registered and 6 guests (based on users active over the past 5 minutes)