Tips-A2Z home page


Sub-categories

(None)

Category  |   Discussion (0)Ceiling

Main > Building & fixing > Building > Timber > Ceiling
Nailing ceiling joists:
- First secure the ladder well.
- Use strong metal clamps to hold the joist in place when nailing.
- Hammer towards the body, with one foot against the joist and the other on ladder rung.
- If using multigrips, nail the horizontal tab to the top wall plate first, then the vertical tab to the top wall plate, and finally the last vertical tab to the ceiling joist. If skew-nailing, pre-drill and oil the nail.
- If a rafter will be installed against the joist later, don't leave nail heads protruding on that side.   kellyjones00 (593)

– –– ——— –– –
Main > Building & fixing > Building > Timber > Ceiling
Use ceiling joists to tie the top wall plates together, against the outward force of the rafters.   kellyjones00 (593)

– –– ——— –– –
Main > Building & fixing > Building > Timber > Ceiling
Use ceiling joists to help stabilise top plate movement on either side of wall joins.   kellyjones00 (593)

– –– ——— –– –
Main > Building & fixing > Building > Timber > Ceiling
A tip for nailing tongue-and-groove pine lining planks to ceiling rafters:
Use diagonal butt joints, the ends cut on a 45 degree angle. Stagger the joints regularly. It looks interesting and neat, and also ensures that each end gets a nail that sits squarely in the centre of the rafter.   kellyjones00 (593)
 
 


Click to enlarge

– –– ——— –– –

 

 

To post a new tip, sign up for a free account.
(Unfortunately this is a necessary spam prevention measure)
Who is online
In total there are 4 users online :: 0 registered and 4 guests (based on users active over the past 5 minutes)